D2488

The D2488 amphibious vehicle is a larger version of the XT66 amphibious vehicle. If your specific project and terrain calls for more hauling capacity, more power, and a lighter footprint on the ground, then this is the amphibious vehicle for you. This vehicle is powered by a 85 HP turbo-charged Kubota diesel engine (V3600T), and it offers over 8,000 pounds of pulling capacity.

The D2488 is constructed from marine-grade aluminum, operates via a closed-loop hydrostatic drive system, and has two rear propellers for deep water crossings. There are two planetary-gear drive motors that provide extreme torque to the 24" rubber track system. The front 3 tires on each side of the vehicle are boogies with buddy bearings. Additional options include front or rear mounted electric winch, seating for six adults, powder coat paint, salt water kit, closed cab system, tie-down points, backup alarm, rear cargo rack, spine board & mounting hardware, and emergency lighting.

Upgrades & Options

  • Water Propulsion System
  • Slime Filled Tires
  • Winch Remote Control
  • Ramsey 9,500 lb. Winch
  • Rear Mount Ramsey 9,500 lb. Winch
  • Front Dry Storage Box
  • Rear Seat
  • Rear Seat Back Rest
  • Seat Belts
  • Floor mats
  • Rear Roll Bar (Grab Bar)
  • Rear Equipment Style Roll Bar
  • Equipment Style Full Roll Cage
  • Cab System
  • Cold Weather Kit with Cab Heater & Block Heater
  • Cold Weather Kit with Block Heater Only
  • Secondary 1250 GPH Bildge Pump
  • Logo Plates with Custom Logo
  • Remote Search Light
  • Emergency Strobe Light

Specs

  • Engine: Kubota V3600T 85 HP turbo charged diesel; 4 cylinder
  • Eletrical System: 12 Volt with 60 Amp Alternator
  • Towing Capacity: 8,000 lbs. rolling load
  • Ground Pressure: Approx. 1.19 PSI (24" track)
  • Hydraulic Tank Capacity: 11 Gal (US) SCH 525 synthetic
  • Battery: Auto Craft Gold 850 CCA
  • Parking / Emergency Brake: Hydrostatic parking brake system
  • Instrumentation: Marine grade components
  • Body Construction: 3/16" undercarriage and 1/8" full weld aluminum
  • Bilge Pump: 1,250 GPH 12 volt with auto / manual switch
  • Hydraulic Oil Cooler: Thermo controlled Forced air
  • Fuel Capacity: 10.5 gallons. Run time is now Approx. 10 hours @ medium RPMs
  • Drive System: Direct drive closed loop hydrostatic
  • Water Propulsion: Hydraulically driven dual 11" bronze props
  • Tri-Mode Drive: Wheels only, Props only, or both Wheels and Props
  • Basic Unit Weight (Dry): Approx. 5,7000 lbs.
  • Payload Capacity Land: 3,000 lbs.
  • Payload Capacity Water: 1,400 lbs.
  • Seating: 6 Adults
  • Land Speed: 14 mph
  • Water Speed: 3 mph
  • Center Ground Clearance: 27"
  • 24" Over the Tire Track System

D2488 Spec Sheet (.doc)